IGTIGT
Rubber Spacer For Slotted TubeCap Rail Rubber Insert For 1/2" to 9/16" Glass (20') Roll - Item #:R19
Ready to Install Rubber Insert Provides Protective Barrier Between Metal Cap and Glass. ...
IGTIGT
Aluminum Base Shoe Floor AnchorageAluminum Base Shoe Pre-Drilled - Item #:R130
Aluminum Base Shoe Pre-Drilled to be used between 1/2" Tempered Glass to 3/4" Laminated Tempered Glass Drilled and Cunter Bored 4" Center To Center Works with R4600 (1/2" Tempered Glass) - R7600 (9/16"  Laminated Tempered Glass) - R6600 (3/4" Laminated Tempered Glass) Glass Fixing Kit This aluminum Base shoe is used as the Base Channel for Glass Railing Systems ...
IGTIGT
Aluminum End Cap For Base ShoeDrilled Aluminum End Cap For Base Shoe - Item #:R219-SN
This aluminum drilled flange is designed to be use with the new R130 or  R135 Aluminum Base Shoe. Available in Satin Finish ...
IGTIGT
Glass Fixing Kit For Base ShoeGlass Fixing Kit For Base Shoe (3 - 4 FT) - Item #:R6600
Fixing Base Shoe suitable for Interior and Exterior Use. Use a combination of 1 Wedge and 1 Gasket every 8" minimum. Use a Minimum of 4 Kits in 10' lenght and 7 to 8 Kits on 19'.8" lenght Designed for use with R130 - R135 Aluminum Base Shoe Floor Anchorage. Kit Include: For 1/2" Tempered Glass : 4 Wedges for 13.52 mm  and 4 Gaskets for 13.52 mm For 9/16" ...
IGTIGT
Square 180 Degree Connector For Slotted Tube 1-9/16"180 Degree Connector For Slotted Tube - Item #:R140
IGT Square Connectors are used to connect and Provide aligment between railing splices and railing to corner splices. Metal Cement is required to achieve a secure and permanent Bond. ...
IGTIGT
Squared End Cap For Slotted Tube 1-9/16" S.S 316End Cap for Slotted Tube 1-9/16" S.S 316 - Item #:R150
IGT Square end cap fit formed Square Cap rails, made on Stainlees Steel 316 and available in two Architectural Finishes: -Brushed Stainlees -Polished ...
IGTIGT
90 Degree Connector For Slotted Tube 1-2/3" DiameterS.S 316 Connector for Cap Rail 1- 2/3" Diameter - Item #:R1400
IGT Round Cap Rail Connector in Stainless Steel 316. Available in two architectutal finishes: Brushed Nickel and Polished Stainless. To be used  from 1/2" inch glass to 9/16" glass. ...
IGTIGT
Base Shoe Rubber Gasket For 1/2" to 9/16" GlassBase Shoe Rubber Gasket 100' Lenght - Item #:R20
IGT's new base shoe glass gasket put in place into the Base Shoe prior to installing the glass, preventing unsafe leaning over the railing to install the gasket. To be used with our new R130 Aluminum Base Shoe Anchorage. ...
IGTIGT
Base Shoe Wedge ToolBase Shoe Wedge Tool - Item #:R88
...
IGTIGT
Screw For Aluminum Base Shoe 4" X 1/2" DiameterScrew For Aluminum Base Shoe 4" X 1/2" Diameter - Item #:R1037
Screw For Aluminum Base Shoe 4" Lenght x 1/2" Diameter. ...
IGTIGT
Square 90 Degree Connector For Slotted Tube 1-9/16"90 Degree Connector For Cap Rail - Item #:R120
IGT 90 Degree Square Connector allows to joint cap rails straight for a perfect installation. ...
IGTIGT
180 Degree Connector For Slotted Tube 1-2/3" Diameter180 Degree Connector For Slotted Tube 1-2/3" Diameter - Item #:R100
180 Degree Connector For Slotted Tube 1-2/3" Diameter. This connectors are used to provide proper alignmet between caprail splicers. ...
IGTIGT
316 S.S Angle Connector 90 Deg. For Slotted Tube 1-5/8” D.90 Degree Connector For Slotted Tube 1-5/8" Diameter - Item #:R0100-BS
90 Degree Connector For Slotted Tube 1-5/8"  Diameter. This connectors are used to provide proper alignmet between caprail splicers. ...
IGTIGT
Aluminum Spacer (Drainage) For Base Shoe SystemAluminum Spacer (Drainage) - Item #:R351
This aluminum Spacer  is designed to be use with the new R130 or  R135 Aluminum Base Shoe. Available in Satin Finish ...
IGTIGT
Base Shoe Rubber Gasket For 3/4" Glass (100' Roll)Base Shoe Rubber Gasket - Item #:R21
IGT's new base shoe glass gasket put in place into the Base Shoe prior to installing the glass, preventing unsafe leaning over the railing to install the gasket. To be used with our new R130 Aluminum Base Shoe Anchorage. ...